I'm having trouble with using 'requests' module on my Mac. I use python34 and I installed 'requests' module via pip. I can verify this via running installation again and it'll show me that module is already installed.
15:49:29|mymac [~]:pip install requests
Requirement already satisfied (use --upgrade to upgrade): requests in /opt/local/Library/Frameworks/Python.framework/Versions/3.4/lib/python3.4/site-packages
Although I can import 'requests' module via interactive Python interpreter, trying to execute 'import requests' in PyCharm yields error 'No module named requests'. I checked my PyCharm Python interpreter settings and (I believe) it's set to same python34 as used in my environment. However, I can't see 'requests' module listed in PyCharm either.
It's obvious that I'm missing something here. Can you guys advise where should I look or what should I fix in order to get this module working? I was living under impression that when I install module via pip in my environment, PyCharm will detect these changes. However, it seems something is broken on my side ...
In my case, using a pre-existing virtualenv did not work in the editor - all modules were marked as unresolved reference (running naturally works, as this is outside of the editor's config, just running an external process (not so easy for debugging)).
Turns out PyCharm did not add the site-packages directory... the fix is to manually add it.
On Pycharm professional 2022.3
Open File -> Settings -> Python Interpreter, open the drop-down and pick "Show All..." (to edit the config) (1), right click your interpreter (2), click "Show Interpreter Paths" (3).
In that screen, manually add the "site-packages" directory of the virtual environment [looks like .../venv/lib/python3.8/site-packages (4) (I've added the "Lib" also, for a good measure); once done and saved, they will turn up in the interpreter paths.
The other thing that won't hurt to do is select "Associate this virtual environment with the current project", in the interpreter's edit box.
If you are using PyCharms CE (Community Edition), then click on:
File->Default Settings->Project Interpreter
See the + sign at the bottom, click on it. It will open another dialog with a host of modules available. Select your package (e.g. requests) and PyCharm will do the rest.
This issue arises when the package you're using was installed outside of the environment (Anaconda or virtualenv, for example). In order to have PyCharm recognize packages installed outside of your particular environment, execute the following steps:
Go to
Preferences -> Project -> Project Interpreter -> 3 dots -> Show All ->
Select relevant interpreter -> click on tree icon Show paths for the selected interpreter
Now check what paths are available and add the path that points to the package installation directory outside of your environment to the interpreter paths.
To find a package location use:
$ pip show gym
Name: gym
Version: 0.13.0
Summary: The OpenAI Gym: A toolkit for developing and comparing your reinforcement learning agents.
Home-page: https://github.com/openai/gym
Author: OpenAI
Author-email: gym#openai.com
License: UNKNOWN
Location: /usr/local/lib/python3.7/site-packages
...
Add the path specified under Location to the interpreter paths, here
/usr/local/lib/python3.7/site-packages
Then, let indexing finish and perhaps additionally reopen your project.
Open python console of your pyCharm. Click on Rerun.
It will say something like following on the very first line
/System/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 /Applications/PyCharm.app/Contents/helpers/pydev/pydevconsole.py 52631 52632
in this scenario pyCharm is using following interpretor
/System/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7
Now fire up console and run following command
sudo /System/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7 -m pip install <name of the package>
This should install your package :)
Pycharm is unable to recognize installed local modules, since python interpreter selected is wrong. It should be the one, where your pip packages are installed i.e. virtual environment.
I had installed packages via pip in Windows. In Pycharm, they were neither detected nor any other Python interpreter was being shown (only python 3.6 is installed on my system).
I restarted the IDE. Now I was able to see python interpreter created in my virtual environment. Select that python interpreter and all your packages will be shown and detected. Enjoy!
Using dual python 2.7 and 3.4 with 2.7 as default, I've always used pip3 to install modules for the 3.4 interpreter, and pip to install modules for the 2.7 interpreter.
Try this:
pip3 install requests
This is because you have not selected two options while creating your project:-
** inherit global site packages
** make available to all projects
Now you need to create a new project and don't forget to tick these two options while selecting project interpreter.
The solution is easy (PyCharm 2021.2.3 Community Edition).
I'm on Windows but the user interface should be the same.
In the project tree, open External libraries > Python interpreter > venv > pyvenv.cfg.
Then change:
include-system-site-packages = false
to:
include-system-site-packages = true
Before going further, I want to point out how to configure a Python interpreter in PyCharm: [SO]: How to install Python using the "embeddable zip file" (#CristiFati's answer). Although the question is for Win, and has some particularities, configuring PyCharm is generic enough and should apply to any situation (with minor changes).
There are multiple possible reasons for this behavior.
1. Python instance mismatch
Happens when there are multiple Python instances (installed, VEnvs, Conda, custom built, ...) on a machine. Users think they're using one particular instance (with a set of properties (installed packages)), but in fact they are using another (with different properties), hence the confusion. It's harder to figure out things when the 2 instances have the same version (and somehow similar locations)
Happens mostly due to environmental configuration (whichever path comes 1st in ${PATH}, aliases (on Nix), ...)
It's not PyCharm specific (meaning that it's more generic, also happens outside it), but a typical PyCharm related example is different console interpreter and project interpreter, leading to confusion
The fix is to specify full paths (and pay attention to them) when using tools like Python, PIP, .... Check [SO]: How to install a package for a specific Python version on Windows 10? (#CristiFati's answer) for more details
This is precisely the reason why this question exists. There are 2 Python versions involved:
Project interpreter: /Library/Frameworks/Python.framework/Versions/3.4
Interpreter having the Requests module: /opt/local/Library/Frameworks/Python.framework/Versions/3.4
well, assuming the 2 paths are not somehow related (SymLinked), but in latest OSX versions that I had the chance to check (Catalina, Big Sur, Monterey) this doesn't happen (by default)
When dealing with this kind of error, it always helps (most likely) displaying the following information (in a script or interpreter console):
import os
import sys
print(sys.executable)
print(sys.version)
print(os.getcwd())
print(getattr(os, "uname", lambda: None)())
print(sys.path)
2. Python's module search mechanism misunderstanding
According to [Python.Docs]: Modules - The Module Search Path:
When a module named spam is imported, the interpreter first searches for a built-in module with that name. These module names are listed in sys.builtin_module_names. If not found, it then searches for a file named spam.py in a list of directories given by the variable sys.path. sys.path is initialized from these locations:
The directory containing the input script (or the current directory when no file is specified).
PYTHONPATH (a list of directory names, with the same syntax as the shell variable PATH).
The installation-dependent default (by convention including a site-packages directory, handled by the site module).
A module might be located in the current dir, or its path might be added to ${PYTHONPATH}. That could trick users into making them believe that the module is actually installed in the current Python instance ('s site-packages). But, when running the current Python instance from a different dir (or with different ${PYTHONPATH}) the module would be missing, yielding lots of headaches
For a fix, check [SO]: How PyCharm imports differently than system command prompt (Windows) (#CristiFati's answer)
3. A PyCharm bug
Not very likely, but it could happen. An example (not related to this question): [SO]: PyCharm 2019.2 not showing Traceback on Exception (#CristiFati's answer)
To fix, follow one of the options from the above URL
4. A glitch
Not likely, but mentioning anyway. Due to some cause (e.g.: HW / SW failure), the system ended up in an inconsistent state, yielding all kinds of strange behaviors
Possible fixes:
Restart PyCharm
Restart the machine
Recreate the project (remove the .idea dir from the project)
Reset PyCharm settings: from menu select File -> Manage IDE Settings -> Restore Default Settings.... Check [JetBrains]: Configuring PyCharm settings or [JetBrains.IntelliJ-Support]: Changing IDE default directories used for config, plugins, and caches storage for more details
Reinstall PyCharm
Needless to say that the last 2 options should only be attempted as a last resort, and only by experts, as they might mess up other projects and not even fix the problem
Not directly related to the question, but posting:
[SO]: Run / Debug a Django application's UnitTests from the mouse right click context menu in PyCharm Community Edition? (a PyCharm related investigation from a while ago)
[SO]: ImportError: No module named win32com.client (#CristiFati's answer)
If you go to pycharm project interpreter -> clicked on one of the installed packages then hover -> you will see where pycharm is installing the packages. This is where you are supposed to have your package installed.
Now if you did sudo -H pip3 install <package>
pip3 installs it to different directory which is /usr/local/lib/site-packages
since it is different directory from what pycharm knows hence your package is not showing in pycharm.
Solution: just install the package using pycharm by going to File->Settings->Project->Project Interpreter -> click on (+) and search the package you want to install and just click ok.
-> you will be prompted package successfully installed and you will see it pycharm.
If any one faces the same problem that he/she installs the python packages but the PyCharm IDE doesn't shows these packages then following the following steps:
Go to the project in the left side of the PyCharm IDE then
Click on the venv library then
Open the pyvenv.cfg file in any editor then
Change this piece of code (include-system-site-packages = flase) from false to true
Then save it and close it and also close then pycharm then
Open PyCharm again and your problem is solved.
Thanks
This did my head in as well, and turns out, the only thing I needed to do is RESTART Pycharm. Sometimes after you've installed the pip, you can't load it into your project, even if the pip shows as installed in your Settings. Bummer.
For Anaconda:
Start Anaconda Navigator -> Enviroments -> "Your_Enviroment" -> Update Index -> Restart IDE.
Solved it for me.
After pip installing everything I needed. I went to the interpreter and re-pointed it back to where it was at already.
My case: python3.6 in /anaconda3/bin/python using virtualenv...
Additionally, before I hit the plus "+" sign to install a new package. I had to deselect the conda icon to the right of it. Seems like it would be the opposite, but only then did it recognize the packages I had/needed via query.
In my case the packages were installed via setup.py + easy_install, and the they ends up in *.egg directories in site_package dir, which can be recognized by python but not pycharm.
I removed them all then reinstalled with pip install and it works after that, luckily the project I was working on came up with a requirements.txt file, so the command for it was:
pip install -r ./requirement.txt
I just ran into this issue in a brand new install/project, but I'm using the Python plugin for IntelliJ IDEA. It's essentially the same as PyCharm but the project settings are a little different. For me, the project was pointing to the right Python virtual environment but not even built-in modules were being recognized.
It turns out the SDK classpath was empty. I added paths for venv/lib/python3.8 and venv/lib/python3.8/site-packages and the issue was resolved. File->Project Structure and under Platform Settings, click SDKs, select your Python SDK, and make sure the class paths are there.
pip install --user discord
above command solves my problem, just use the "--user" flag
I fixed my particular issue by installing directly to the interpreter. Go to settings and hit the "+" below the in-use interpreter then search for the package and install. I believe I'm having the issue in the first place because I didn't set up with my interpreter correctly with my venv (not exactly sure, but this fixed it).
I was having issues with djangorestframework-simplejwt because it was the first package I hadn't installed to this interpreter from previous projects before starting the current one, but should work for any other package that isn't showing as imported. To reiterate though I think this is a workaround that doesn't solve the setup issue causing this.
If you are having issues with the underlying (i.e. pycharm's languge server) mark everything as root and create a new project. See details: https://stackoverflow.com/a/73418320/1601580 this seems to happy to me only when I install packages as in editable mode with pip (i.e. pip install -e . or conda develop). Details: https://stackoverflow.com/a/73418320/1601580
--WINDOWS--
if using Pycharm GUI package installer works fine for installing packages for your virtual environment but you cannot do the same in the terminal,
this is because you did not setup virtual env in your terminal, instead, your terminal uses Power Shell which doesn't use your virtual env
there should be (venv) before you're command line as shown instead of (PS)
if you have (PS), this means your terminal is using Power Shell instead of cmd
to fix this, click on the down arrow and select the command prompt
select command prompt
now you will get (venv) and just type pip install #package name# and the package will be added to your virtual environment
On windows I had to cd into the venv folder and then cd into the scripts folder, then pip install module started to work
cd venv
cd scripts
pip install module
instead of running pip install in the terminal -> local use terminal -> command prompt
see below image
pycharm_command_prompt_image
In your pycharm terminal run pip/pip3 install package_name
I have recently started learning python using code academy and today I downloaded everything that I thought I would use. I downloaded Python and Atom. I have two separate drives on my computer. An SSD with not much storage and a hard drive with a lot of storage. My Windows is installed on the SSD, but I wanted to download python and atom on the hard drive, so I did so. When I installed Python I made sure to check add to PATH and the environmental variable thing. Now when I go to the command prompt, it shows "C:\Users\Gustavo>" but my python is installed on a different drive. Is there a way I could make this work? Thanks a lot.
There are two ways to install python:
Download directly from the website
Use a package manager
Case 1: Download directly from the website
Go to the python's website to download the version you would like to use.
Install the downloaded file (During the installation you can customize the installation directory)
Make sure to enable "Add python.exe to Path"
After installation has been completed, open your command prompt and type where python. Your python directory should be printed.
If all is good, then typing python should launch python in your command prompt. You can also run python by cd in the directory where your python is located and launch the .exe
You have mentioned about changing path and environmental variables, and that's probably for the purpose of keeping multiple versions of python. If that's the case, there's actually a quick fix for this:
Go to the folder where you installed Python.
Copy the python.exe file, and rename that copy in the same directory as python3.exe (If you installed version 2, then rename as python2.exe).
Now in command prompt type python2 or python3 and you should be able to launch either versions respectively.
Note: If you face issues regarding paths, then you should detail the error messages.
Case 2: Use a package manager
Choose a package manger: chocolatey, scoop, and others.
Check out these links for changing package manager's installation directory, installation method varies by the managers, so you should consult the developers should you experience problems:
chocolatey
scoop
Package managers will manage the versions for you, if you choose to install multiple versions. You should refer to the package manager's website for detailed information. However, you can quickly check the installed version by typing python --version. The python version number should be printed back to you, same applies to python3.
Double check your installation directory by which python
Type python or python3 to run your python of choice.
Lastly, you have mentioned atom. Atom is just a text editor: you can write python codes with it.
When you are done editing, you can open the command prompt and navigate to where your code resides, and type
python filename.py
This will run your code directly from the command prompt. There are many atom plugins available to make this process seamlessly integrated within atom. iPython and Jupyter plugins are first things that comes to my mind, you should specifically check out Hydrogen.
I am having issues in trying to get the Pydev install in Eclipse to recognise my installed modules such as Beautiful Soup. Within the Preferences > PyDev > Interpreter I have used the Auto Config (which didn't work) and also tried telling Pydev where the Python interpreter is manually. I am on Macosx running Python 2.7.2.
If I import BeautifulSoup within IDLE it works fine. What Eclipse doesn't seem to do is load the site-packages. Going back to the auto-config it loads user/bin/python as the Interpreter and my system path consists of these:
I have tried reinstalling Eclipse, following several tutorials on Youtube and also following other peoples solutions with no success. Can anyone help? Thanks.
When you press the auto-config or add a new interpreter, it'll show a dialog with all the paths it found to be in the PYTHONPATH, but some are not checked by default (it only leaves checked what it believes to be common to all projects -- i.e.: under the python installation), so, try checking if the site-packages appear at that dialog and check it if it's there...
Also, I remember that MacOS has an issue in which it doesn't ship source files for the libraries, so, that may be an issue too (in which case I'd recommend installing a Python version from python.org instead of using the one that comes pre-installed in MacOS).
Try to change proxy settings of eclipse.
Select Active Provider to "Manual". Set HTTP/HTTPS proxy. Clear SOCKS proxy if this is set.(select SOCKS proxy raw and click "Clear" button) Restart Eclipse to apply these settings.
I am trying to import the OpenGL.GL module.
Given the py file with that line, I can perform "python file.py" just fine, but I cannot run that same file when used in Aptana or Eclipse. Both IDEs have PyDev installed.
I do have PyOpenGL installed.
I wish to point out that I can still import other modules (PIL, numpy), which were installed the same way as the PyOpenGL. I am confident that there is only 1 python running on my MacOS.
I had the same problem after installing a different version of PyOpen and my Eclipse PyDev path is messed up. What I did was remove the interpreter link and re-added the old one which made PyDev to re-scan my libs. This seems to fix the problem. Don't forget for all your projects, you need to go to the property (Right click project->properties) and re-select the interpreter.
Maybe you need to reconfigure your interpreter.
If you installed PyOpenGL as an egg after pydev was set up your PYTHONPATH might be out of date.
Check out Preferences->PyDev->Interpreter - Python
Are you sure you don't have multiple versions of python? Seems to me like the interpreter that aptana uses is not the same as the one used from command line. You can look in:
Run -> Run configurations -> Python run -- then you have Interpreter tab
There you can click : See resulting command line. Than will get you the python that is used as well as the python path