We Keep Coding

How to use from x import y using importlib in Python

I wanted to install and import a package from script. Then I wanted to add from x import y and from x import * in that script.(I was making some functions actually).
I successfully installed and imported using subprocess and importlib. But I'm at a loss in from x import y and from x import *. Tried these codes and some others.
globals()[package] = importlib.import_module('package','class')
globals()[package] = importlib.import_module('class','package')
globals()[package] = importlib.import_module('package','*')
globals()[package] = importlib.import_module('*','package')
importlib.import_module('gtts','gTTS')
importlib.import_module('gtts','*')
But they didn't work. Shows:
NameError: name 'gTTS' is not defined
ModuleNotFoundError: No module named 'gTTS'
etc.

I don't think you can load methods directly, since this method just loads modules. A module is loaded with import module and i defined as "A module is a file containing Python definitions and statements. The file name is the module name with the suffix .py appended. " (check documentation). from x import y does also do the import module but sets another namespace (see discussion here). What you can do is load your module and then set your namespace manually afterwards, this is what the from x import y syntax does. You can load a module with the path (in this example i want to load read_csv from pandas):
importlib.import_module(".io.parsers", "pandas")
(check the path with print(inspect.getmodule(read_csv).__name__))
Also a solution like jottbe mentioned in the commentary would be possible

The exact syntax to correspond to mischva11's answer, is as follows:
tempmod = importlib.import_module("x_mymodule")
y = x_mymodule.y
del tempmod # optionally delete the reference to the parent module
Imports only the attribute y from the module x_mymod, similar to from x_mymodule import y. You can get the ... as z functionality by assigning it to any name you want in the 2nd line of code.
I found it useful to delete the parent module from the namespace, when using this in a sub-module, to prevent cluttering up the namespace.
I think to get the import * function you'll have to iterate through the module's attributes and assign them to a named attribute. Here are two hints that help you get there:
How to list all functions in a Python module?
Set attributes of module from inside the module: https://stackoverflow.com/a/2933481/2453202

Packages, Modules, and classes within those

What is the "correct" way to import/use classmethods when my class is part of a module?
I created a Python utility for my co-workers, basically using my Java knowledge, Stack Overflow and Google. It works fine, but an experienced Python person reviewed everything and suggested to improve the pythonicity of the code.
Initially, I just used sys.path.append() to add sub-directories that would contain many .py files (basically one class within each .py).
Now I am trying to get the thing working with packages and modules:
I added (empty) __init__.py files in my root directory, and all sub-directories;
I turned all my classes into "modules", by adding __name__ = "whatever-filename" at line 1.
And, well, imports work. In my main script, I can do
from classes import MyHelper
(where classes refers to a sub-directory, and MyHelper to a module within). But:
MyHelper.some_class_method()
gives me:
Traceback (most recent call last):
File "./xyz", line 12, in <module>
MyHelper.some_class_method()
AttributeError: 'module' object has no attribute 'some_class_method'
But I didn't change MyHelper - it still has all the #classmethods that I could use before introducing packages/modules.
Edit: MyHelper looks like this:
__name__ = "MyHelper"
...
class MyHelper(object):
"""This class..."""
...

MyHelper refers to a module name when imported, not the class name which is the same. You can try the following import instead to import a class from a module in a child directory.
from classes.MyHelper import MyHelper
MyHelper.calling_my_class_method_here()

from X import Y
is really importing a class or function Y from the module X into the current module's namespace, and you can use Y directly.
Alternatively, if you just imported the module X, eg
import X
then you would call the function (or class) Y as X.Y. So in your case, try just
import MyHelper
MyHelper.some_class_method()

Python: How to import all methods and attributes from a module dynamically

I'd like to load a module dynamically, given its string name (from an environment variable). I'm using Python 2.7. I know I can do something like:
import os, importlib
my_module = importlib.import_module(os.environ.get('SETTINGS_MODULE'))
This is roughly equivalent to
import my_settings
(where SETTINGS_MODULE = 'my_settings'). The problem is, I need something equivalent to
from my_settings import *
since I'd like to be able to access all methods and variables in the module. I've tried
import os, importlib
my_module = importlib.import_module(os.environ.get('SETTINGS_MODULE'))
from my_module import *
but I get a bunch of errors doing that. Is there a way to import all methods and attributes of a module dynamically in Python 2.7?

If you have your module object, you can mimic the logic import * uses as follows:
module_dict = my_module.__dict__
try:
to_import = my_module.__all__
except AttributeError:
to_import = [name for name in module_dict if not name.startswith('_')]
globals().update({name: module_dict[name] for name in to_import})
However, this is almost certainly a really bad idea. You will unceremoniously stomp on any existing variables with the same names. This is bad enough when you do from blah import * normally, but when you do it dynamically there is even more uncertainty about what names might collide. You are better off just importing my_module and then accessing what you need from it using regular attribute access (e.g., my_module.someAttr), or getattr if you need to access its attributes dynamically.

Not answering precisely the question as worded, but if you wish to have a file as proxy to a dynamic module, you can use the ability to define __getattr__ on the module level.
import importlib
import os
module_name = os.environ.get('CONFIG_MODULE', 'configs.config_local')
mod = importlib.import_module(module_name)
def __getattr__(name):
return getattr(mod, name)

My case was a bit different - wanted to dynamically import the constants.py names in each gameX.__init__.py module (see below), cause statically importing those would leave them in sys.modules forever (see: this excerpt from Beazley I picked from this related question).
Here is my folder structure:
game/
__init__.py
game1/
__init__.py
constants.py
...
game2/
__init__.py
constants.py
...
Each gameX.__init__.py exports an init() method - so I had initially a from .constants import * in all those gameX.__init__.py which I tried to move inside the init() method.
My first attempt in the lines of:
## -275,2 +274,6 ## def init():
# called instead of 'reload'
+ yak = {}
+ yak.update(locals())
+ from .constants import * # fails here
+ yak = {x: y for x,y in locals() if x not in yak}
+ globals().update(yak)
brec.ModReader.recHeader = RecordHeader
Failed with the rather cryptic:
SyntaxError: import * is not allowed in function 'init' because it contains a nested function with free variables
I can assure you there are no nested functions in there. Anyway I hacked and slashed and ended up with:
def init():
# ...
from .. import dynamic_import_hack
dynamic_import_hack(__name__)
Where in game.__init__.py:
def dynamic_import_hack(package_name):
print __name__ # game.init
print package_name # game.gameX.init
import importlib
constants = importlib.import_module('.constants', package=package_name)
import sys
for k in dir(constants):
if k.startswith('_'): continue
setattr(sys.modules[package_name], k, getattr(constants, k))
(for setattr see How can I add attributes to a module at run time? while for getattr How can I import a python module function dynamically? - I prefer to use those than directly access the __dict__)
This works and it's more general than the approach in the accepted answer cause it allows you to have the hack in one place and use it from whatever module. However I am not really sure it's the best way to implement it - was going to ask a question but as it would be a duplicate of this one I am posting it as an answer and hope to get some feedback. My questions would be:
why this "SyntaxError: import * is not allowed in function 'init'" while there are no nested functions ?
dir has a lot of warnings in its doc - in particular it attempts to produce the most relevant, rather than complete, information - this complete worries me a bit
is there no builtin way to do an import * ? even in python 3 ?

How to get reference to module by string name and call its method by string name?

The modules are already imported in the current module ( no need of dynamic import ), and have an ALIAS name.
The requirement is to get reference to the module by its alias name, and call its function
current module :
import libraries.mymaths.products as myproductlib
def call_func(module_name,method_name):
# module_name = 'myproductlib' , method_name='mult'
# how to call myproductlib.mult here ?
getattr(MODULE_REF, method_name) would help me to get reference to method, but how to get reference to module by its alias name ?

To get the module, you can use globals. To get the function, use getattr:
getattr(globals()[module_name], function_name)
Importing a module just binds the module object to a name in whatever namespace you import it in. In the usual case where you import at the top level of the module, this means it creates a global variable.

BrenBarn's globals() solution works with the module name, ALIASESED or not, only if the import is located in this module (the one currently running).
If you still want to get hold of the module by its unaliased name (e.g. it was imported earlier, from some other module), get it from sys.modules with a FQN module name like "apackage.somemodule":
>>> import sys
>>> import libraries.mymaths.products as myproductlib
>>> globals()["myproductlib"] == sys.modules["libraries.mymaths.products"]
True

Use 'import module' or 'from module import'?

I've tried to find a comprehensive guide on whether it is best to use import module or from module import. I've just started with Python and I'm trying to start off with best practices in mind.
Basically, I was hoping if anyone could share their experiences, what preferences other developers have and what's the best way to avoid any gotchas down the road?

The difference between import module and from module import foo is mainly subjective. Pick the one you like best and be consistent in your use of it. Here are some points to help you decide.
import module
Pros:
Less maintenance of your import statements. Don't need to add any additional imports to start using another item from the module
Cons:
Typing module.foo in your code can be tedious and redundant (tedium can be minimized by using import module as mo then typing mo.foo)
from module import foo
Pros:
Less typing to use foo
More control over which items of a module can be accessed
Cons:
To use a new item from the module you have to update your import statement
You lose context about foo. For example, it's less clear what ceil() does compared to math.ceil()
Either method is acceptable, but don't use from module import *.
For any reasonable large set of code, if you import * you will likely be cementing it into the module, unable to be removed. This is because it is difficult to determine what items used in the code are coming from 'module', making it easy to get to the point where you think you don't use the import any more but it's extremely difficult to be sure.

There's another detail here, not mentioned, related to writing to a module. Granted this may not be very common, but I've needed it from time to time.
Due to the way references and name binding works in Python, if you want to update some symbol in a module, say foo.bar, from outside that module, and have other importing code "see" that change, you have to import foo a certain way. For example:
module foo:
bar = "apples"
module a:
import foo
foo.bar = "oranges" # update bar inside foo module object
module b:
import foo
print foo.bar # if executed after a's "foo.bar" assignment, will print "oranges"
However, if you import symbol names instead of module names, this will not work.
For example, if I do this in module a:
from foo import bar
bar = "oranges"
No code outside of a will see bar as "oranges" because my setting of bar merely affected the name "bar" inside module a, it did not "reach into" the foo module object and update its bar.

Even though many people already explained about import vs import from, I want to try to explain a bit more about what happens under the hood, and where all the places it changes are.
import foo:
Imports foo, and creates a reference to that module in the current namespace. Then you need to define completed module path to access a particular attribute or method from inside the module.
E.g. foo.bar but not bar
from foo import bar:
Imports foo, and creates references to all the members listed (bar). Does not set the variable foo.
E.g. bar but not baz or foo.baz
from foo import *:
Imports foo, and creates references to all public objects defined by that module in the current namespace (everything listed in __all__ if __all__ exists, otherwise everything that doesn't start with _). Does not set the variable foo.
E.g. bar and baz but not _qux or foo._qux.
Now let’s see when we do import X.Y:
>>> import sys
>>> import os.path
Check sys.modules with name os and os.path:
>>> sys.modules['os']
<module 'os' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> sys.modules['os.path']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
Check globals() and locals() namespace dicts with os and os.path:
>>> globals()['os']
<module 'os' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> locals()['os']
<module 'os' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> globals()['os.path']
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
KeyError: 'os.path'
>>>
From the above example we found that only os is inserted in the local and global namespace.
So, we should be able to use:
>>> os
<module 'os' from
'/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> os.path
<module 'posixpath' from
'/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>>
But not path.
>>> path
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
NameError: name 'path' is not defined
>>>
Once you delete the os from locals() namespace, you won't be able to access os as well as os.path even though they exist in sys.modules:
>>> del locals()['os']
>>> os
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
NameError: name 'os' is not defined
>>> os.path
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
NameError: name 'os' is not defined
>>>
Now let's talk about import from:
from:
>>> import sys
>>> from os import path
Check sys.modules with os and os.path:
>>> sys.modules['os']
<module 'os' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> sys.modules['os.path']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
We found that in sys.modules we found as same as we did before by using import name
OK, let's check how it looks like in locals() and globals() namespace dicts:
>>> globals()['path']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> locals()['path']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> globals()['os']
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
KeyError: 'os'
>>>
You can access by using name path not by os.path:
>>> path
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> os.path
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
NameError: name 'os' is not defined
>>>
Let's delete 'path' from locals():
>>> del locals()['path']
>>> path
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
NameError: name 'path' is not defined
>>>
One final example using an alias:
>>> from os import path as HELL_BOY
>>> locals()['HELL_BOY']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> globals()['HELL_BOY']
<module 'posixpath' from /System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>>
And no path defined:
>>> globals()['path']
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
KeyError: 'path'
>>>

Both ways are supported for a reason: there are times when one is more appropriate than the other.
import module: nice when you are using many bits from the module. drawback is that you'll need to qualify each reference with the module name.
from module import ...: nice that imported items are usable directly without module name prefix. The drawback is that you must list each thing you use, and that it's not clear in code where something came from.
Which to use depends on which makes the code clear and readable, and has more than a little to do with personal preference. I lean toward import module generally because in the code it's very clear where an object or function came from. I use from module import ... when I'm using some object/function a lot in the code.

I personally always use
from package.subpackage.subsubpackage import module
and then access everything as
module.function
module.modulevar
etc. The reason is that at the same time you have short invocation, and you clearly define the module namespace of each routine, something that is very useful if you have to search for usage of a given module in your source.
Needless to say, do not use the import *, because it pollutes your namespace and it does not tell you where a given function comes from (from which module)
Of course, you can run in trouble if you have the same module name for two different modules in two different packages, like
from package1.subpackage import module
from package2.subpackage import module
in this case, of course you run into troubles, but then there's a strong hint that your package layout is flawed, and you have to rethink it.

import module
Is best when you will use many functions from the module.
from module import function
Is best when you want to avoid polluting the global namespace with all the functions and types from a module when you only need function.

I've just discovered one more subtle difference between these two methods.
If module foo uses a following import:
from itertools import count
Then module bar can by mistake use count as though it was defined in foo, not in itertools:
import foo
foo.count()
If foo uses:
import itertools
the mistake is still possible, but less likely to be made. bar needs to:
import foo
foo.itertools.count()
This caused some troubles to me. I had a module that by mistake imported an exception from a module that did not define it, only imported it from other module (using from module import SomeException). When the import was no longer needed and removed, the offending module was broken.

Here is another difference not mentioned. This is copied verbatim from http://docs.python.org/2/tutorial/modules.html
Note that when using
from package import item
the item can be either a submodule (or subpackage) of the package, or some other name defined in the package, like a function, class or variable. The import statement first tests whether the item is defined in the package; if not, it assumes it is a module and attempts to load it. If it fails to find it, an ImportError exception is raised.
Contrarily, when using syntax like
import item.subitem.subsubitem
each item except for the last must be a package; the last item can be a module or a package but can’t be a class or function or variable defined in the previous item.

Since I am also a beginner, I will be trying to explain this in a simple way:
In Python, we have three types of import statements which are:
1. Generic imports:
import math
this type of import is my personal favorite, the only downside to this import technique is that if you need use any module's function you must use the following syntax:
math.sqrt(4)
of course, it increases the typing effort but as a beginner, it will help you to keep track of module and function associated with it, (a good text editor will reduce the typing effort significantly and is recommended).
Typing effort can be further reduced by using this import statement:
import math as m
now, instead of using math.sqrt() you can use m.sqrt().
2. Function imports:
from math import sqrt
this type of import is best suited if your code only needs to access single or few functions from the module, but for using any new item from the module you have to update import statement.
3. Universal imports:
from math import *
Although it reduces typing effort significantly but is not recommended because it will fill your code with various functions from the module and their name could conflict with the name of user-defined functions.
example:
If you have a function of your very own named sqrt and you import math, your function is safe: there is your sqrt and there is math.sqrt. If you do from math import *, however, you have a problem: namely, two different functions with the exact same name. Source: Codecademy

I would like to add to this. It can be useful to understand how Python handles imported modules as attributes if you run into circular imports.
I have the following structure:
mod/
__init__.py
main.py
a.py
b.py
c.py
d.py
From main.py I will import the other modules using differnt import methods
main.py:
import mod.a
import mod.b as b
from mod import c
import d
dis.dis shows the difference (note module names, a b c d):
1 0 LOAD_CONST 0 (-1)
3 LOAD_CONST 1 (None)
6 IMPORT_NAME 0 (mod.a)
9 STORE_NAME 1 (mod)
2 12 LOAD_CONST 0 (-1)
15 LOAD_CONST 1 (None)
18 IMPORT_NAME 2 (b)
21 STORE_NAME 2 (b)
3 24 LOAD_CONST 0 (-1)
27 LOAD_CONST 2 (('c',))
30 IMPORT_NAME 1 (mod)
33 IMPORT_FROM 3 (c)
36 STORE_NAME 3 (c)
39 POP_TOP
4 40 LOAD_CONST 0 (-1)
43 LOAD_CONST 1 (None)
46 IMPORT_NAME 4 (mod.d)
49 LOAD_ATTR 5 (d)
52 STORE_NAME 5 (d)
55 LOAD_CONST 1 (None)
In the end they look the same (STORE_NAME is result in each example), but this is worth noting if you need to consider the following four circular imports:
example1
foo/
__init__.py
a.py
b.py
a.py:
import foo.b
b.py:
import foo.a
>>> import foo.a
>>>
This works
example2
bar/
__init__.py
a.py
b.py
a.py:
import bar.b as b
b.py:
import bar.a as a
>>> import bar.a
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "bar\a.py", line 1, in <module>
import bar.b as b
File "bar\b.py", line 1, in <module>
import bar.a as a
AttributeError: 'module' object has no attribute 'a'
No dice
example3
baz/
__init__.py
a.py
b.py
a.py:
from baz import b
b.py:
from baz import a
>>> import baz.a
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "baz\a.py", line 1, in <module>
from baz import b
File "baz\b.py", line 1, in <module>
from baz import a
ImportError: cannot import name a
Similar issue... but clearly from x import y is not the same as import import x.y as y
example4
qux/
__init__.py
a.py
b.py
a.py:
import b
b.py:
import a
>>> import qux.a
>>>
This one also works

import package
import module
With import, the token must be a module (a file containing Python commands) or a package (a folder in the sys.path containing a file __init__.py.)
When there are subpackages:
import package1.package2.package
import package1.package2.module
the requirements for folder (package) or file (module) are the same, but the folder or file must be inside package2 which must be inside package1, and both package1 and package2 must contain __init__.py files. https://docs.python.org/2/tutorial/modules.html
With the from style of import:
from package1.package2 import package
from package1.package2 import module
the package or module enters the namespace of the file containing the import statement as module (or package) instead of package1.package2.module. You can always bind to a more convenient name:
a = big_package_name.subpackage.even_longer_subpackage_name.function
Only the from style of import permits you to name a particular function or variable:
from package3.module import some_function
is allowed, but
import package3.module.some_function
is not allowed.

To add to what people have said about from x import *: besides making it more difficult to tell where names came from, this throws off code checkers like Pylint. They will report those names as undefined variables.

My own answer to this depends mostly on first, how many different modules I'll be using. If i'm only going to use one or two, I'll often use from ... import since it makes for fewer keystrokes in the rest of the file, but if I'm going to make use of many different modules, I prefer just import because that means that each module reference is self-documenting. I can see where each symbol comes from without having to hunt around.
Usuaully I prefer the self documenting style of plain import and only change to from.. import when the number of times I have to type the module name grows above 10 to 20, even if there's only one module being imported.

This is my directory structure of my current directory:
.
└─a
└─b
└─c
The import statement remembers all intermediate names.
These names have to be qualified:
In[1]: import a.b.c
In[2]: a
Out[2]: <module 'a' (namespace)>
In[3]: a.b
Out[3]: <module 'a.b' (namespace)>
In[4]: a.b.c
Out[4]: <module 'a.b.c' (namespace)>
The from ... import ... statement remembers only the imported name.
This name must not be qualified:
In[1]: from a.b import c
In[2]: a
NameError: name 'a' is not defined
In[2]: a.b
NameError: name 'a' is not defined
In[3]: a.b.c
NameError: name 'a' is not defined
In[4]: c
Out[4]: <module 'a.b.c' (namespace)>
Note: Of course, I restarted my Python console between steps 1 and 2.

There have been many answers, but none have mentioned testing (with unittest or pytest).
tl;dr
Use import foo for external modules to simplify testing.
The Hard Way
Importing classes/functions (from foo import bar) individually from a module makes red-green-refactor cycles tedious. For example, if my file looks like
# my_module.py
from foo import bar
class Thing:
def do_thing(self):
bar('do a thing')
and my test is
# test_my_module.py
from unittest.mock import patch
import my_module
patch.object(my_module, 'bar')
def test_do_thing(mock_bar):
my_module.Thing().do_thing()
mock_bar.assert_called_with('do a thing')
At first glance, this seems great. But what happens if I want to implement Thing class in a different file? My structure would have to change like this...
# my_module.py
from tools import Thing
def do_thing():
Thing().do_thing()
# tools.py
from foo import bar
class Thing:
def do_thing(self):
bar('do a thing')
# test_my_module.py
from unittest.mock import patch
import my_module
import tools # Had to import implementation file...
patch.object(tools, 'bar') # Changed patch
def test_do_thing(mock_bar):
my_module.do_thing() # Changed test (expected)
mock_bar.assert_called_with('do a thing')
Unfortunately, since I used from foo import bar, I need to update my patch to reference the tools module. Essentially, since my test knows too much about implementation, much more than expected needs to be changed to do this refactor.
The Better Approach
Using import foo, my tests can ignore how the module is implemented and simply patch the whole module.
# my_module.py
from tools import Thing
def do_thing():
Thing().do_thing()
# tools.py
import foo
class Thing:
def do_thing(self):
foo.bar('do a thing') # Specify 'bar' is from 'foo' module
# test_my_module.py
from unittest.mock import patch
import my_module
patch('foo') # Patch entire foo module
def test_do_thing(mock_foo):
my_module.do_thing() # Changed test (expected)
mock_foo.bar.assert_called_with('do a thing')
The less implementation details your tests know, the better. That way, if you come up with a better solution (use classes instead of functions, use additional files to separate ideas, etc.), less needs to be changed in your tests to accommodate the refactor.

One of the significant difference I found out which surprisingly no-one has talked about is that using plain import you can access private variable and private functions from the imported module, which isn't possible with from-import statement.
Code in image:
setting.py
public_variable = 42
_private_variable = 141
def public_function():
print("I'm a public function! yay!")
def _private_function():
print("Ain't nobody accessing me from another module...usually")
plain_importer.py
import settings
print (settings._private_variable)
print (settings.public_variable)
settings.public_function()
settings._private_function()
# Prints:
# 141
# 42
# I'm a public function! yay!
# Ain't nobody accessing me from another module...usually
from_importer.py
from settings import *
#print (_private_variable) #doesn't work
print (public_variable)
public_function()
#_private_function() #doesn't work

As Jan Wrobel mentions, one aspect of the different imports is in which way the imports are disclosed.
Module mymath
from math import gcd
...
Use of mymath:
import mymath
mymath.gcd(30, 42) # will work though maybe not expected
If I imported gcd only for internal use, not to disclose it to users of mymath, this can be inconvenient. I have this pretty often, and in most cases I want to "keep my modules clean".
Apart from the proposal of Jan Wrobel to obscure this a bit more by using import math instead, I have started to hide imports from disclosure by using a leading underscore:
# for instance...
from math import gcd as _gcd
# or...
import math as _math
In larger projects this "best practice" allows my to exactly control what is disclosed to subsequent imports and what isn't. This keeps my modules clean and pays back at a certain size of project.

since many people answered here but i am just trying my best :)
import module is best when you don't know which item you have to import from module. In this way it may be difficult to debug when problem raises because
you don't know which item have problem.
form module import <foo> is best when you know which item you require to import and also helpful in more controlling using importing specific item according to your need. Using this way debugging may be easy because you know which item you imported.

Import Module - You don't need additional efforts to fetch another thing from module. It has disadvantages such as redundant typing
Module Import From - Less typing &More control over which items of a module can be accessed.To use a new item from the module you have to update your import statement.

There are some builtin modules that contain mostly bare functions (base64, math, os, shutil, sys, time, ...) and it is definitely a good practice to have these bare functions bound to some namespace and thus improve the readability of your code. Consider how more difficult is to understand the meaning of these functions without their namespace:
copysign(foo, bar)
monotonic()
copystat(foo, bar)
than when they are bound to some module:
math.copysign(foo, bar)
time.monotonic()
shutil.copystat(foo, bar)
Sometimes you even need the namespace to avoid conflicts between different modules (json.load vs. pickle.load)
On the other hand there are some modules that contain mostly classes (configparser, datetime, tempfile, zipfile, ...) and many of them make their class names self-explanatory enough:
configparser.RawConfigParser()
datetime.DateTime()
email.message.EmailMessage()
tempfile.NamedTemporaryFile()
zipfile.ZipFile()
so there can be a debate whether using these classes with the additional module namespace in your code adds some new information or just lengthens the code.

I was answering a similar question post but the poster deleted it before i could post. Here is one example to illustrate the differences.
Python libraries may have one or more files (modules). For exmaples,
package1
|-- __init__.py
or
package2
|-- __init__.py
|-- module1.py
|-- module2.py
We can define python functions or classes inside any of the files based design requirements.
Let's define
func1() in __init__.py under mylibrary1, and
foo() in module2.py under mylibrary2.
We can access func1() using one of these methods
import package1
package1.func1()
or
import package1 as my
my.func1()
or
from package1 import func1
func1()
or
from package1 import *
func1()
We can use one of these methods to access foo():
import package2.module2
package2.module2.foo()
or
import package2.module2 as mod2
mod2.foo()
or
from package2 import module2
module2.foo()
or
from package2 import module2 as mod2
mod2.foo()
or
from package2.module2 import *
foo()

In simple words, this is all about programmer convenience. At the core level, they simply import all functionality of the module.
import module: When you use import module then to use methods of this module you have to write module.method(). Every time you use any method or property then you have to refer to the module.
from module import all: When you use from module import all than to use methods of this module you just have to write method() without referring to the module.

There is a crucial aspect of these imports that #ahfx already mentioned, namely the internals of the process of loading modules. This pops up if your system needs to use circular imports (e.g. you want to make use of dependency injection in some popular http frameworks). In such cases the from {module} import {function} appears much more aggressive with its requirements on how the loading process proceeds. Let us take the example:
#m1.py:
print('--start-m1--')
from m2 import * # form does not matter; just need to force import of m2
print('--mid-m1--')
def do1(x):
print(x)
print('--end-m1--')
importing
#m2.py
print('--start-m2--')
# from m1 import * # A
# from m1 import do1 # B
# import m1 # C
# D -- no import of "do1" at all
print('--mid-m2--')
def do2(x):
m1.do1(x)
print('--end-m2--')
run via
#main.py:
from m1 import do1
do1('ok')
Of all the import possibilities in m2.py (A,B,C,D), the from {module} import {function} is the only one that actually crashes the load process, leading to the infamous (CPython 3.10.6)
ImportError: cannot import name 'do1' from partially initialized module 'm1'
(most likely due to a circular import)
While I cannot say why this happens, it appears that the from ... import ... statement puts a more stringent requirement on "how far" the module in question is already in its initialization process.