I'm trying to write a sublime text plugin which would make some windows api calls. I did some research and found out that this python library provides the API's that I need to use.
So, I'm trying to to use this library. When I add import statement for it in my sublime text plugin it gives me error
ImportError: No module named win32api
I'd assume that it's because sublime text comes with inbuilt python and I haven't actually installed these libraries on my system it's throwing up these errors. How do I add such libraries in my sublime plugin also How would I distribute such plugin?
In order to use a third-party library in Sublime, you'll need to include it in your plugin directory, and you'll need to include the correct version for the Python you're working with - 2.6 for ST2, 3.3 for ST3. In order for the next step to succeed properly, install the version of Python you're targeting on your system from python.org. For example, if you're working with ST3, make sure you install Python 3.3.2 on your system.
Then, download the correct version of pywin32 from Christoph Gohlke's Python Extension Packages for Windows repository. Install it on your system, then try copying c:\Python33\Lib\site-packages\win32\ to your Packages/MyPlugin folder in Sublime. The installer makes several directories in site-packages, so depending on the system calls you're planning on making you might need to copy other directories as well - win32com, win32comext, pywin32_system32, and/or pythonwin.
You should now be able to import win32 or import .win32 in your plugin. Good luck!
Related
I am using PyCharm to develop a python project, which uses an external library called win10toast. I have installed win10toast using PyCharm. However, when I tried to run the .py file using cmd (i.e Externally running the python file), an error shows up:
ModuleNotFoundError: No module named 'win10toast'.
I have python 3.6.4. I installed win10toast using PyCharm.
from win10toast import ToastNotifier
I expect the program to run without any error, but currently I am getting the ModuleNotFound error.
Python can be tricky to run properly because it is sensitive to where you installed your dependencies (such as external libraries and packages). If you installed Python to one directory, but accidentally installed the external library to another directory, when you run your .py program, it will be unable to call from the external library because it doesn't exist in the same library that Python is running from.
Lookup where you installed Python on your computer and then find where you installed the external library. Once your find where you installed the external library, move its entire package content to the same directory where Python is installed. Or better yet, reinstall the external library with pip into the same directory as Python.
If you're on Mac, Python and its related dependencies are usually stored somewhere in /User/bin. If you're on Windows, it will be stored somewhere in your C:// directory (possibly somewhere in C:\Users\username\Local\AppData). If you're on Linux, it will be stored somewhere in /usr/bin. Whatever you do, don't move Python from wherever it is because sometimes that can mess up your system for certain operating systems like Mac, which comes with its own version of Python (Python 2.7 I believe, which is outdated anyway).
Lastly, you may have two different versions of Python on your computer, which is common; Python 2.7 and Python 3+. If you wrote your program in one version, but ran it from the other, the external library can only be called from whichever Python version you installed it to. Try running your .py program with python3 instead of python (or vice versa) and see what happens. If it works with one python version over the other, that tells you that the external library is installed in the other version's directory.
That should solve your issue.
I would suggest that you not use PyCharm to install packages, at least not
if the result deviates in the slightest from doing a "pip install" at the command line. I see no reason to involve PyCharm in configuring Python installations. It's just asking for trouble.
I admit that I'm not familiar with the practice I'm suggesting you avoid. I've been using PyCharm since pretty much the week it came out (was an avid user of the IntelliJ Python plugin before that), and have never once considered doing anything but installing Python modules at the command line. That way, I'm sure right where those modules are going (into which base Python install or venv). Also, I know I'm doing all that I can to minimize the differences that I might see between running code in PyCharm and running it at the command line. I'm making my suggestion based solely on this practice having never gone wrong for me.
I have multiple base Python versions installed, and dozens of venvs defined on top of those. PyCharm is great at allowing me to indicate which of these I want to apply to any project or Run/Debug configuration, and utilizing them seamlessly. But agin, I administer these environments at the command line exclusively.
I still experience issues in switching between the command line and PyCharm in terms of one module referencing others in a single source tree. My company has come up with a simple solution to this that insures that all of our Python scripts still run when moving away from PyCharm and its logic for maintaining the Python Path within a project. I've explained the mechanism before on S.O. I'd be happy to find that if anyone is interested.
The library win10toast installed in the directory: YOUR_PYCHARM_WORKSPACE\PycharmProjects\YOUR_PROJECT_NAME\venv\Lib\site-packages
but when you are running your program using cmd, pycharm interpreter uses site-packages directory that you installed python at there. for Ex: C:\Python27\Lib\site-packages
So, you can install the win10toast library to this windows directory using pip.
I'm writting an application in c++ which uses pybind11 library to provide python support.
I use some non standard python libraries installed with pip.
Now I'd like to build a Windows installer which would contain complete application with all required python modules and proper python environment.
I add extracted python-embed.zip provided by https://www.python.org/ but it lacks of modules which are required by external modules I use.
For example one of modules I use in my application requires pkg_resources.
I would add it with pip to my installation, but there are no modules available for pip matching this name.
I'm not sure how to solve these problems in right way.
I want to deploy an executable (.exe) from my python2.7 project with everything included. I have seen pyinstaller and py2exe but the problem is that my project uses a lot of third-party packages that are not supported by default. What is the best choice for such cases? Is there any other distribution packager that could be used?
Thank you
The executable creation packages should be able to grab 3rd party packages if they're installed. Sometimes you have to specify what to include if the library abuses Python's importing system or it's not a "pure Python" package. For example, I would sometimes have to specifically include lxml to get py2exe to pick it up properly.
The py2exe project for Python 2 hasn't been updated in quite a long time, so I would certainly recommend one of the alternatives: PyInstaller, cx_freeze or bb_freeze.
I have only seen issues with MSVCP90.dll when using non pure Python packages, such as wxPython. Normally you can add that in your setup.py to include it. If that doesn't work, then you could also add it using an installer utility like NSIS. Or you may just have to state in your README that your app depends on Microsoft's C++ redistributable and include a link to it.
I need to support some software that is using an old Python version (2.4). So I have downloaded and compiled Python 2.4 and installed it in a virtualenv. So far, all OK and normal procedure.
But the software is trying to import an rpm module. And I cannot find a source for that module (it is not part of the standard Python library, afaict).
Typically, once the virtualenv is enabled (source env/bin/activate) I can install required software using easy_install. But easy_install rpm is failing to find anything. There is a pyrpm module, but it is not the same thing (it installs a module called "pyrpm"). And google searches are useless, as they all link to articles on how to build rpms...
If I were using the system python (on Ubuntu) I could install the python-rpm package. But that is for Python 2.7. How do I install the equivalent for Python 2.4?
[My impression is that the rpm libraries, used by many Linux systems, include a Python library, which is packaged as python-dev by the distro. But I can't see how to access that for an arbitrary python version.]
I AM NOT LOOKING FOR AN RPM THAT CONTAINS PYTHON 2.4. I AM LOOKING FOR A MODULE NAMED rpm THAT IS USED BY SOFTWARE WRITTEN FOR PYTHON 2.4.
It's right there, in the python-rpm RPM package:
http://rpmfind.net/linux/rpm2html/search.php?query=python-rpm
You will probably want to download the package contents, extract them, and then use
python setup.py install
From your active environment.
Of course, as it's pre compiled, you might have trouble getting the C extension to run.
I'm not familiar enough with RPM's to know whether you can get the source from there.
No guarantees the package will work with your python version though.
there's no simple way to do this; the python library is part of the system rpm package and interfaces to C code, so is closely tied to the rpm package installed on your machine.
instead, it's much simpler to install an old OS in a VM (eg CentOS 5) that uses Python 2.4. then everything is consistent and works.
the sources for the rpm module can be found here: http://www.rpm.org/wiki/Download
After you download the wanted version read and follow the INSTALL instructions in order to compile it on your target OS. Afterwards make sure you add the correct path to the 'site-packages' folder the installation chose into your PYTHONPATH environment variable.
To test start your python interpreter and run 'import rpm'
HTH,
Ran
I need to run a Python script on a machine that doesn't have Python installed. I use Python as a part of a software package, and Python runs behind the curtain without the user's notice of it.
What I did was as follows.
Copy python.exe, python26.dll, msvcr90.dll and Microsoft.VC90.CRT.manifest
Zip all the directory in LIBs directory as the python26.zip
Copy all the necessary dll/pyd files inside the DLL directory.
It seems to work, but when I change the python26.zip to the other name such as pythonlib.zip, it cannot find the Python library any more.
Question 1: What's the magic behind the python26.zip name? Python automatically finds a library inside a python26.zip, but not with different name?
Question 2: If I have python26.zip at the same directory where python.exe/python26.dll is, I don't need to add path sys.path.append (THE PATH TO python26.zip). Is it correct?
Python has built-in libraries, and sys is one of them. I thought that I could use sys.path to point to whatever Python library in the ZIP file I needed. But, surprisingly, if I use the library name as Python26.zip, it just worked. Why is this so?
I have been using PortablePython for a year now, and I find it great as it is working on my locked-down work-notebook.
There is a Python 2.5.4, 2.6.1 and a 3.0.1 version.
From Sylvain Pointeau's blog:
The procedure is actually very simple, just download the msi installer from
http://www.python.org/getit/ and type the command:
C:\development\apps>msiexec /a python-3.3.2.msi /qb
TARGETDIR=C:\development\apps\python33
His example uses msiexec (aka MSI Administrative Installer for you UniExtract people) to force an extract to TARGETDIR. You'll notice that there is an internal installer which you delete.
EDIT: Also you can make it silent as well, but doing this every time you want to use python seems dumb. Just extract to a tempdir and then cleanup when they uninstall it.
PS: I didn't see how old this was! :D
I looked into the Python interpreter source code, and I did some experiments. And I found that the Python interpreter prepend the "THE DIRECTORY OF PYTHONXXX.DLL + pythonXXX.zip" no matter what. XXX is the version of the Python interpreter.
As a result, if there is a python26.zip in the same directory as the python26.dll. I could use all of the Python library automatically.
Another option is installing WinPython. It uses an installer, but it doesn't require admin rights (tested on Windows 7). Unlike Portable Python, it even has a Python 3.3.5 version.
py2exe will allow you to compile your Python script into a Windows executable. It may or may not work better than PortablePython, but perhaps it could be a little cleaner with regard to the number of files you need to distribute for your "behind the curtain" program.
Another option might be to consider PyInstaller which will create stand-alone Python applications cross-platform. From the home page:
PyInstaller is a program that converts (packages) Python programs into stand-alone executables, under Windows, Linux, and Mac OS X. [...] The main goal of PyInstaller is to be compatible with 3rd-party packages out-of-the-box. This means that, with PyInstaller, all the required tricks to make external packages work are already integrated within PyInstaller itself so that there is no user intervention required. You'll never be required to look for tricks in wikis and apply custom modification to your files or your setup scripts. As an example, libraries like PyQt and Matplotlib are fully supported, without having to handle plugins or external data files manually. Check our compatibility list of SupportedPackages.