I'm trying to make a program that will convert any text into a different form. That means that a text such as 'hi there' becomes 'hI tHeRe'.
list = []
word = input('Enter in a word or a sentence! ')
for num in range(len(word)):
list.clear()
list.append('i')
letter = word[num]
for x in range(len(list)):
if x % 2 == 0:
i = word.index(letter)
place = letter.lower()
word = word.replace(word[i], place)
if not x % 2 == 0:
i = word.index(letter)
place = letter.upper()
word = word.replace(word[i], place)
print(word)
However, when I run the code it just prints the same string as normal.
When using replace, you have to assign the result to your variable:
word = word.replace(word[i], place)
However, replace is actually not what you want here. replace replaces all instances of a certain pattern with a new string. In your current code, every instance of whatever letter word[i] represents will be replaced with the result of .lower() or .upper().
You also don't want to use the word list, since doing so will shadow the Python built-in list class.
If you want to keep most of your original logic, you can follow #khelwood's suggestion in the comments and end up with the following:
word = input('Enter in a word or a sentence! ')
wordList = list(word)
for i in range(len(word)):
if i % 2 == 0:
wordList[i] = word[i].lower()
else:
wordList[i] = word[i].upper()
print(''.join(wordList))
Here is one of my previous codes, you can change all the variable names to whatever you see fit.
s = input('Enter in a word or string.')
ret = ""
i = True # capitalize
for char in s:
if i:
ret += char.upper()
else:
ret += char.lower()
if char != ' ':
i = not i
print(ret)
I hope it works for you.
Try this one liner -
a = 'hi there'
''.join([i[1].lower() if i[0]%2==0 else i[1].upper() for i in enumerate(a)])
'hI ThErE'
If you care about each word starting from lowercase then this nested list comprehension works -
' '.join([''.join([j[1].lower() if j[0]%2==0 else j[1].upper() for j in enumerate(i)]) for i in a.split()])
'hI tHeRe'
The problem is with list.clear in the beginning of the for loop.
Each iteration you clear the list so the second for iteration run on the first item only.
Remove list.clear and it should scan the input word
For this problem, I am given strings ThatAreLikeThis where there are no spaces between words and the 1st letter of each word is capitalized. My task is to lowercase each capital letter and add spaces between words. The following is my code. What I'm doing there is using a while loop nested inside a for-loop. I've turned the string into a list and check if the capital letter is the 1st letter or not. If so, all I do is make the letter lowercase and if it isn't the first letter, I do the same thing but insert a space before it.
def amendTheSentence(s):
s_list = list(s)
for i in range(len(s_list)):
while(s_list[i].isupper()):
if (i == 0):
s_list[i].lower()
else:
s_list.insert(i-1, " ")
s_list[i].lower()
return ''.join(s_list)
However, for the test case, this is the behavior:
Input: s: "CodesignalIsAwesome"
Output: undefined
Expected Output: "codesignal is awesome"
Console Output: Empty
You can use re.sub for this:
re.sub(r'(?<!\b)([A-Z])', ' \\1', s)
Code:
import re
def amendTheSentence(s):
return re.sub(r'(?<!\b)([A-Z])', ' \\1', s).lower()
On run:
>>> amendTheSentence('GoForPhone')
go for phone
Try this:
def amendTheSentence(s):
start = 0
string = ""
for i in range(1, len(s)):
if s[i].isupper():
string += (s[start:i] + " ")
start = i
string += s[start:]
return string.lower()
print(amendTheSentence("CodesignalIsAwesome"))
print(amendTheSentence("ThatAreLikeThis"))
Output:
codesignal is awesome
that are like this
def amendTheSentence(s):
new_sentence=''
for char in s:
if char.isupper():
new_sentence=new_sentence + ' ' + char.lower()
else:
new_sentence=new_sentence + char
return new_sentence
new_sentence=amendTheSentence("CodesignalIsAwesome")
print (new_sentence)
result is codesignal is awesome
Problem 1.
This problem provides practice using a while True loop. Write a function named
twoWords that gets and returns two words from a user. The first word is of a
specified length, and the second word begins with a specified letter.
The function twoWords takes two parameters:
an integer, length, that is the length of the first word and
a character, firstLetter, that is the first letter of the second word.
The second word may begin with either an upper or lower case instance of
firstLetter. The function twoWords should return the two words in a list. Use
a while True loop and a break statement in the implementation of twoWords. The
following is an example of the execution of twoWords:
print(twoWords(4, 'B')):
A 4-letter word please two
A 4-letter word please one
A 4-letter word please four
A word beginning with B please apple
A word beginning with B please pear
A word beginning with B please banana
['four', 'banana']
This is what I have so far, but it keeps asking me the first question over again
even if I have the right word length. What am I doing wrong?
def twoWords(length, firstLetter):
wordLen = input('A 4-letter word please ')
while len(wordLen) != int(length):
wordlen = input('A 4-letter word please ')
word = input('A word beginning with ' + firstLetter + ' please ')
while word[0] != firstLetter:
word = input('A word beginning with ' + firstLetter + ' please ')
return[wordLen, word]
def twoWords(length,firstLetter):
firstWord = ""
secondWord= ""
while True:
firstWord = input('A ' + str(length) + '-letter word please.')
if length == len(firstWord):
break
while True:
secondWord = input('A word beginning with ' + firstLetter+ ' please')
if secondWord[0] == firstLetter.upper() or secondWord[0] == firstLetter.lower():
break
return [firstWord,secondWord]
print(twoWords(4,'B'))
def twoWord(length, firstLetter):
while True:
word1=(input("Enter a "+ str(length)+"-letter word please:"))
if len(word1)==int(length):
break
while True:
word2=input("Please enter the word beginning with "+firstLetter+" please:")
if word2[0].upper()==firstLetter or word2[0].lower()==firstLetter:
break
return word1, word2
print(twoWord(5, 'b'))
So, here is what I got:
def getSentence():
sentence = input("What is your sentence? ").upper()
if sentence == "":
print("You haven't entered a sentence. Please re-enter a sentence.")
getSentence()
elif sentence.isdigit():
print("You have entered numbers. Please re-enter a sentence.")
getSentence()
else:
import string
for c in string.punctuation:
sentence = sentence.replace(c,"")
return sentence
def list(sentence):
words = []
for word in sentence.split():
if not word in words:
words.append(word)
print(words)
def replace(words,sentence):
position = []
for word in sentence:
if word == words[word]:
position.append(i+1)
print(position)
sentence = getSentence()
list = list(sentence)
replace = replace(words,sentence)
I have only managed to get this far, my full intention is to take the sentence, seperate into words, change each word into a number e.g.
words = ["Hello","world","world","said","hello"]
And make it so that each word has a number:
So lets say that "hello" has the value of 1, the sentence would be '1 world world said 1'
And if world was 2, it would be '1 2 2 said 1'
Finally, if "said" was 3, it would be '1 2 2 1 2'
Any help would be greatly appreciated, I will then develop this code so that the sentence and such is stored into a file using file.write() and file.read() etc
Thanks
If you want just the position in which each word is you can do
positions = map(words.index,words)
Also, NEVER use built-in function names for your variables or functions. And also never call your variables the same as your functions (replace = replace(...)), functions are objects
Edit: In python 3 you must convert the iterator that map returns to a list
positions = list(map(words.index, words))
Or use a comprehension list
positions = [words.index(w) for w in words]
Does it matter what order the words are turned into numbers? Is Hello and hello two words or one? Why not something like:
import string
sentence = input() # user input here
sentence.translate(str.maketrans('', '', string.punctuation))
# strip out punctuation
replacements = {ch: str(idx) for idx, ch in enumerate(set(sentence.split()))}
# builds {"hello": 0, "world": 1, "said": 2} or etc
result = ' '.join(replacements.get(word, word) for word in sentence.split())
# join back with the replacements
Another idea (although don't think it's better than the rest), use dictionaries:
dictionary = dict()
for word in words:
if word not in dictionary:
dictionary[word] = len(dictionary)+1
Also, on your code, when you're calling "getSentence" inside "getSentence", you should return its return value:
if sentence == "":
print("You haven't entered a sentence. Please re-enter a sentence.")
return getSentence()
elif sentence.isdigit():
print("You have entered numbers. Please re-enter a sentence.")
return getSentence()
else:
...
I am trying to use python to write a function that checks whether the first letter of a given word, for instance "ball" is a vowel in either uppercase or lowercase. So for instance:
#here is a variable containing a word:
my_word = "Acrobat"
#letters in vowel as a list
the_vowel = ["a","e","i","o","u"]
How do a check that the first letter in "Acrobat" is one of the vowels in the list? I also need to take into consideration whether it is upper or lowercase?
try my_word[0].lower() in the_vowel
I don't know if it is better than the answers already posted here, but you could also do:
vowels = ('a','e','i','o','u','A','E','I','O','U')
myWord.startswith(vowels)
Here are some hints to help you figure it out.
To get a single letter from a string subscript the string.
>>> 'abcd'[2]
'c'
Note that the first character is character zero, the second character is character one, and so forth.
The next thing to note is that an upper case letter does not compare equal to a lower case letter:
>>> 'a' == 'A'
False
Luckily, python strings have the methods upper and lower to change the case of a string:
>>> 'abc'.upper()
'ABC'
>>> 'a' == 'A'.lower()
True
To test for membership in a list us in:
>>> 3 in [1, 2, 3]
True
>>> 8 in [1, 2, 3]
False
So in order to solve your problem, tie together subscripting to get a single letter, upper/lower to adjust case, and testing for membership using in.
my_word = "Acrobat"
the_vowel = "aeiou"
if myword[0].lower() in the_vowel:
print('1st letter is a vowel')
else:
print('Not vowel')
My code looks like this.
original = raw_input("Enter a word:")
word = original.lower()
first = word[0]
vowel = "aeiou"
if len(original) > 0 and original.isalpha():
if first in vowel:
print word
print first
print "vowel!"
else:
print word
print first
print "consonant
x = (input ("Enter any word: "))
vowel = "aeiouAEIOU"
if x[0] in vowel:
print ("1st letter is vowel: ",x)
else:
print ("1st letter is consonant: ",x)
Here's how I did it since the inputted word needs to be checked first before storing it as a variable:
original = raw_input('Enter a word:')
if len(original) > 0 and original.isalpha():
word = original.lower()
first = word[0]
if first in ['a','e','i','o','u']:
print "vowel"
else:
print "consonant"
else:
print 'empty'
changes:
if my_word[0] in ('a','e','i','o','u'):
print(' Yes, the first letter is vowel ')
else:
print(' No, the first letter is not vowel ')
So, Here is the simple code for finding out that the first letter is either vowel or not!! If you have any further query in python or js, then comment it down.
import ast,sys
input_str = sys.stdin.read()
if input_str[0] in ['a','e','i','o','u','A','E','I','O','U']:
print('YES')
else:
print('NO')
Here is the solution to the exercise on codecadmy.com:
original = raw_input('Enter a word:')
word = original.lower()
first = word[0]
vowel = "aeiou"
if len(original) > 0 and original.isalpha():
if first in vowel:
print 'vowel'
else:
print 'consonant'
else:
print 'empty'
Will it not be (slightly) faster to define the_vowel as a dictionary than a list?
the_vowel = {"a":1,"e":1,"i":1,"o":1,"u":1}
my_word[0].lower() in the_vowel
anti vowel Function
def anti_vowel(text):
vowel = ["a","e","i","o","u"]
new_text = ''
for char in text:
if char.lower() in vowel:
continue
else:
new_text += char
print new_text
return new_text
x = raw_input("Enter a word: ")
vowels=['a','e','i','o','u']
for vowel in vowels:
if vowel in x:
print "Vowels"
else:
print "No vowels"
This would print out 5 lines, if any of those includes a line that says Vowels then that means there is a vowel. I know this isn't the best way but it works.
Let's do it in more simply way
def check_vowel(s1):
v=['a','e','i','o','u']
for i in v:
if s1[0].lower()==i:
return (f'{s1} start with Vowel word {i}')
else:
return (f" {s1} start with Consonants word {s1[0]}")
print(check_vowel("orange"))
inp = input('Enter a name to check if it starts with vowel : ') *# Here we ask for a word*
vowel = ['A','E','I','O','U', 'a','e','i','o','u'] *# This is the list of all vowels*
if inp[0] in vowel:
print('YES') *# Here with the if statement we check if the first alphabet is a vowel (alphabet from the list vowel)*
else:
print('NO') *# Here we get the response as NO if the first alphabet is not a vowel*
my_word = "Acrobat"
the_vowel = ["a", "e", "i", "o", "u"]
if my_word[0].lower() in the_vowel:
print(my_word + " starts with a vowel")
else:
print(my_word + " doesnt start with a vowel")
input_str="aeroplane"
if input_str[0].lower() in ['a','e','i','o','u']:
print('YES')
else:
print('NO')
Output will be YES as the input string starts with a here.