I want to make a series of figures with 3x3 subplots using matplotlib. I can make the first figure fine (9 total subplots), but when I try to make a tenth subplot I get this error: ValueError: num must be 1 <= num <= 9, not 10. What I think I want to do is plot the first 9 subplots, clear the figure, and then plot the next 9 subplots. I haven't been able to get this approach to work so far though. If anyone could offer some suggestions I would really appreciate it!
Thanks!
Call plt.show() before the 10th chart, then start over with plt.subplot(3, 3, 1), followed by the code to plot the 10th chart
You have to define a new figure after plotting each subplot of the first figure.
for ex-
import matplotlib.pyplot as plt
plt.figure(1)
fig, ax = plt.subplots(3,3)
plt.figure(2)
fig, ax = plt.subplots(3,3)
plt.show()
Output:
Related
I've been struggling to generate the frequency plot of 2 columns named "Country" and "Company" in my DataFrame and show them as 2 subplots. Here's what I've got.
Figure1 = plt.figure(1)
Subplot1 = Figure1.add_subplot(2,1,1)
and here I'm going to use the bar chart pd.value_counts(DataFrame['Country']).plot('barh')
to shows as first subplot.
The problem is, I cant just go: Subplot1.pd.value_counts(DataFrame['Country']).plot('barh') as Subplot1. has no attribute pd. ~ Could anybody shed some light in to this?
Thanks a million in advance for your tips,
R.
You don't have to create Figure and Axes objects separately, and you should probably avoid initial caps in variable names, to differentiate them from classes.
Here, you can use plt.subplots, which creates a Figure and a number of Axes and binds them together. Then, you can just pass the Axes objects to the plot method of pandas:
from matplotlib import pyplot as plt
fig, (ax1, ax2) = plt.subplots(1, 2, figsize=(8, 4))
pd.value_counts(df['Country']).plot('barh', ax=ax1)
pd.value_counts(df['Company']).plot('barh', ax=ax2)
Pandas' plot method can take in a Matplotlib axes object and direct the resulting plot into that subplot.
# If you want a two plots, one above the other.
nrows = 2
ncols = 1
# Here axes contains 2 objects representing the two subplots
fig, axes = plt.subplots(nrows, ncols, figsize=(8, 4))
# Below, "my_data_frame" is the name of your Pandas dataframe.
# Change it accordingly for the code to work.
# Plot first subplot
# This counts the number of times each country appears and plot
# that as a bar char in the first subplot represented by axes[0].
my_data_frame['Country'].value_counts().plot('barh', ax=axes[0])
# Plot second subplot
my_data_frame['Company'].value_counts().plot('barh', ax=axes[1])
I'm trying to plot two datasets into one plot with matplotlib. One of the two plots is misaligned by 1 on the x-axis.
This MWE pretty much sums up the problem. What do I have to adjust to bring the box-plot further to the left?
import matplotlib.pyplot as plt
import pandas as pd
import numpy as np
titles = ["nlnd", "nlmd", "nlhd", "mlnd", "mlmd", "mlhd", "hlnd", "hlmd", "hlhd"]
plotData = pd.DataFrame(np.random.rand(25, 9), columns=titles)
failureRates = pd.DataFrame(np.random.rand(9, 1), index=titles)
color = {'boxes': 'DarkGreen', 'whiskers': 'DarkOrange', 'medians': 'DarkBlue',
'caps': 'Gray'}
fig = plt.figure()
ax1 = fig.add_subplot(111)
ax2 = ax1.twinx()
plotData.plot.box(ax=ax1, color=color, sym='+')
failureRates.plot(ax=ax2, color='b', legend=False)
ax1.set_ylabel('Seconds')
ax2.set_ylabel('Failure Rate in %')
plt.xlim(-0.7, 8.7)
ax1.set_xticks(range(len(titles)))
ax1.set_xticklabels(titles)
fig.tight_layout()
fig.show()
Actual result. Note that its only 8 box-plots instead of 9 and that they're starting at index 1.
The issue is a mismatch between how box() and plot() work - box() starts at x-position 1 and plot() depends on the index of the dataframe (which defaults to starting at 0). There are only 8 plots because the 9th is being cut off since you specify plt.xlim(-0.7, 8.7). There are several easy ways to fix this, as #Sheldore's answer indicates, you can explicitly set the positions for the boxplot. Another way you can do this is to change the indexing of the failureRates dataframe to start at 1 in construction of the dataframe, i.e.
failureRates = pd.DataFrame(np.random.rand(9, 1), index=range(1, len(titles)+1))
note that you need not specify the xticks or the xlim for the question MCVE, but you may need to for your complete code.
You can specify the positions on the x-axis where you want to have the box plots. Since you have 9 boxes, use the following which generates the figure below
plotData.plot.box(ax=ax1, color=color, sym='+', positions=range(9))
I'm using matplotlib to graph two boxplots. I am able to get them printed as subplots on the same figure, but I am having trouble getting them side by side on the same set of axes.
Here's the code which finally worked:
fig, axes = plt.subplots(nrows=1, ncols=2)
axes[0].boxplot(mads_dp52)
axes[1].boxplot(mads_dp53)
plt.show()
I want to plot some Data with Matplotlib scatter plot.
I used the following code to plot the Data as a scatter with using the same axes for the different subplots.
import numpy as np
import matplotlib.pyplot as plt
epsilon= np.array([1,2,3,4,5])
f, (ax1, ax2, ax3, ax4) = plt.subplots(4, sharex= True, sharey=True)
ax1.scatter(epsilon, mean_percent_100_0, color='r', label='Totaldehnung= 0.000')
ax1.scatter(epsilon, mean_percent_100_03, color='g',label='Totaldehnung= 0.003')
ax1.scatter(epsilon, mean_percent_100_05, color='b',label='Totaldehnung= 0.005')
ax1.set_title('TOR_R')
ax2.scatter(epsilon, mean_percent_111_0,color='r')
ax2.scatter(epsilon, mean_percent_111_03,color='g')
ax2.scatter(epsilon, mean_percent_111_05,color='b')
ax3.scatter(epsilon, mean_percent_110_0,color='r')
ax3.scatter(epsilon, mean_percent_110_03,color='g')
ax3.scatter(epsilon, mean_percent_110_05,color='b')
ax4.scatter(epsilon, mean_percent_234_0,color='r')
ax4.scatter(epsilon, mean_percent_234_03,color='g')
ax4.scatter(epsilon, mean_percent_234_05,color='b')
# Fine-tune figure; make subplots close to each other and hide x ticks for
# all but bottom plot.
f.subplots_adjust(hspace=0.13)
plt.setp([a.get_xticklabels() for a in f.axes[:-1]], visible=False)
plt.locator_params(axis = 'y', nbins = 4)
ax1.grid()
ax2.grid()
ax3.grid()
ax4.grid()
plt.show()
Now i want to have a x-axis with smaller space between each point. I tried to change the range but it was not working. Can someone help me?
To make the x ticks come closer you might have to set the dimensions of the figure.
Since, in your case, the figure is already created, Set the size of the plot using set_size_inches method of the figure object.
This question contains a few other ways to do the same.
Adding the following line before the plt.show()
fig.set_size_inches(2,8)
Gives me this :
Which I hope is what you are trying to do.
I am using matplotlib 1.2.x and Python 2.6.5 on Ubuntu 10.0.4. I am trying to create a SINGLE plot that consists of a top plot and a bottom plot.
The X axis is the date of the time series. The top plot contains a candlestick plot of the data, and the bottom plot should consist of a bar type plot - with its own Y axis (also on the left - same as the top plot). These two plots should NOT OVERLAP.
Here is a snippet of what I have done so far.
datafile = r'/var/tmp/trz12.csv'
r = mlab.csv2rec(datafile, delimiter=',', names=('dt', 'op', 'hi', 'lo', 'cl', 'vol', 'oi'))
mask = (r["dt"] >= datetime.date(startdate)) & (r["dt"] <= datetime.date(enddate))
selected = r[mask]
plotdata = zip(date2num(selected['dt']), selected['op'], selected['cl'], selected['hi'], selected['lo'], selected['vol'], selected['oi'])
# Setup charting
mondays = WeekdayLocator(MONDAY) # major ticks on the mondays
alldays = DayLocator() # minor ticks on the days
weekFormatter = DateFormatter('%b %d') # Eg, Jan 12
dayFormatter = DateFormatter('%d') # Eg, 12
monthFormatter = DateFormatter('%b %y')
# every Nth month
months = MonthLocator(range(1,13), bymonthday=1, interval=1)
fig = pylab.figure()
fig.subplots_adjust(bottom=0.1)
ax = fig.add_subplot(111)
ax.xaxis.set_major_locator(months)#mondays
ax.xaxis.set_major_formatter(monthFormatter) #weekFormatter
ax.format_xdata = mdates.DateFormatter('%Y-%m-%d')
ax.format_ydata = price
ax.grid(True)
candlestick(ax, plotdata, width=0.5, colorup='g', colordown='r', alpha=0.85)
ax.xaxis_date()
ax.autoscale_view()
pylab.setp( pylab.gca().get_xticklabels(), rotation=45, horizontalalignment='right')
# Add volume data
# Note: the code below OVERWRITES the bottom part of the first plot
# it should be plotted UNDERNEATH the first plot - but somehow, that's not happening
fig.subplots_adjust(hspace=0.15)
ay = fig.add_subplot(212)
volumes = [ x[-2] for x in plotdata]
ay.bar(range(len(plotdata)), volumes, 0.05)
pylab.show()
I have managed to display the two plots using the code above, however, there are two problems with the bottom plot:
It COMPLETELY OVERWRITES the bottom part of the first (top) plot - almost as though the second plot was drawing on the same 'canvas' as the first plot - I can't see where/why that is happening.
It OVERWRITES the existing X axis with its own indice, the X axis values (dates) should be SHARED between the two plots.
What am I doing wrong in my code?. Can someone spot what is causing the 2nd (bottom) plot to overwrite the first (top) plot - and how can I fix this?
Here is a screenshot of the plot created by the code above:
[[Edit]]
After modifying the code as suggested by hwlau, this is the new plot. It is better than the first in that the two plots are separate, however the following issues remain:
The X axis should be SHARED by the two plots (i.e. the X axis should be shown only for the 2nd [bottom] plot)
The Y values for the 2nd plot seem to be formmated incorrectly
I think these issues should be quite easy to resolve however, my matplotlib fu is not great at the moment, as I have only recently started programming with matplotlib. any help will be much appreciated.
There seem to be a couple of problems with your code:
If you were using figure.add_subplots with the full
signature of subplot(nrows, ncols, plotNum) it may have
been more apparent that your first plot asking for 1 row
and 1 column and the second plot was asking for 2 rows and
1 column. Hence your first plot is filling the whole figure.
Rather than fig.add_subplot(111) followed by fig.add_subplot(212)
use fig.add_subplot(211) followed by fig.add_subplot(212).
Sharing an axis should be done in the add_subplot command using sharex=first_axis_instance
I have put together an example which you should be able to run:
import matplotlib.pyplot as plt
import matplotlib.ticker as mticker
import matplotlib.dates as mdates
import datetime as dt
n_pts = 10
dates = [dt.datetime.now() + dt.timedelta(days=i) for i in range(n_pts)]
ax1 = plt.subplot(2, 1, 1)
ax1.plot(dates, range(10))
ax2 = plt.subplot(2, 1, 2, sharex=ax1)
ax2.bar(dates, range(10, 20))
# Now format the x axis. This *MUST* be done after all sharex commands are run.
# put no more than 10 ticks on the date axis.
ax1.xaxis.set_major_locator(mticker.MaxNLocator(10))
# format the date in our own way.
ax1.xaxis.set_major_formatter(mdates.DateFormatter('%Y-%m-%d'))
# rotate the labels on both date axes
for label in ax1.xaxis.get_ticklabels():
label.set_rotation(30)
for label in ax2.xaxis.get_ticklabels():
label.set_rotation(30)
# tweak the subplot spacing to fit the rotated labels correctly
plt.subplots_adjust(hspace=0.35, bottom=0.125)
plt.show()
Hope that helps.
You should change this line:
ax = fig.add_subplot(111)
to
ax = fig.add_subplot(211)
The original command means that there is one row and one column so it occupies the whole graph. So your second graph fig.add_subplot(212) cover the lower part of the first graph.
Edit
If you dont want the gap between two plots, use subplots_adjust() to change the size of the subplots margin.
The example from #Pelson, simplified.
import matplotlib.pyplot as plt
import datetime as dt
#Two subplots that share one x axis
fig,ax=plt.subplots(2,sharex=True)
#plot data
n_pts = 10
dates = [dt.datetime.now() + dt.timedelta(days=i) for i in range(n_pts)]
ax[0].bar(dates, range(10, 20))
ax[1].plot(dates, range(10))
#rotate and format the dates on the x axis
fig.autofmt_xdate()
The subplots sharing an x-axis are created in one line, which is convenient when you want more than two subplots:
fig, ax = plt.subplots(number_of_subplots, sharex=True)
To format the date correctly on the x axis, we can simply use fig.autofmt_xdate()
For additional informations, see shared axis demo and date demo from the pylab examples.
This example ran on Python3, matplotlib 1.5.1